FAQ:VoIP:ACD/fr

ACD Call Logs

• Information: Jusqu'à présent, sur les téléphones physiques et logiciels, vous nous pouvez voir dans le journal d'appel que ceux qui ont réellement sonné sur votre équipement.
• Problème: Si vous étiez déjà en ligne ou indisponible à ce moment, les nouveaux appels ne vous sont pas envoyés et ne sont donc pas visibles dans le journal d'appels.
• Solution: Nous avons accompli un nouveau projet qui permet d'intégrer dans les logiciels softphones VTX le journal des appels des groupes ACD permettant de voir les appels manqués par le groupe ou qui ont débordé vers une autre destination. Vous pouvez aussi marquer un appel manqué comme lu/traité afin d'informer vos collègues que vous avez déjà géré cet appel.
• Information Supplémentaire: @VTX: Project number is #86974 - [FR] ACD Call Logs in Softphones - Set missed as read

ACD Call logs on softphones in platform version 7.x

ACD Call logs Softphones version 7 Filter

BLF: monitor ACD Group and Colleagues

• Information
  

With ACD, as a security measure, it in not possible to monitor a call for an ACD Queue or monitoring a colleague getting incoming calls via ACD Group, when he is not member of this group!

• Solution
  

Add the person to the ACD Group in logged-out mode that wish to monitor ACD Queue or Colleagues Setup BLF for ACD Group and Members to monitor

Add members in Logged-Out Mode

Steps to perform:

1. Go to My Services > Telephony > Your Virtual PBX
   
2. Click on Open editor and open Tab GROUPS
   
3. Search for the group you wish to monitor and click on configure
   
4. Add the additional members and save by click on Register
   
5. Now logout those members of the ACD group by clicking on the green icon (logged in) to turn into red (logged out)
   

Setup BLF to monitor ACD Group

Steps to perform:

1. Go to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-phone you wish to setup BLF and click on Action
   
3. Choose as Action type: BLF, as Parameter: search for ACD Group by type the ACD Group you wish to monitor (example 300) and click on Apply
   

BLF pour surveiller le groupe ACD - Kiosque - touche programmable

Example Yealink BLF : Incoming Call via ACD ringing (Example Yealink - ACD WIKI ringing)

ACD - Monitore du groupe ACD - Exemple Yealink

Setup BLF to monitor Colleagues getting calls via ACD Group

Steps to perform:

1. Go to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-phone you wish to setup BLF and click on Action
   
3. Choose as Action type: BLF, as Parameter: search for the member by type the user you wish to monitor (example 5302) and click on Apply
   

BLF Monitor Collegue - Kiosk

Example Yealink BLF : User Snom D765 ringing

ACD - monitore Collègues - Exemple Yealink

BLF: Intercept or pickup calls from ACD Group or Colleagues

• Information
  

With ACD, as a security measure, it in not possible to intercept or pickup a call for an ACD Queue or a Colleagues getting incoming calls via ACD group.

Intercept or pickup calls from ACD Group

• Solution
  

1. Add the person to the ACD Group in logged-out mode that wish to pickup calls incoming to ACD Queue or Colleagues in ACD Group, following: Add members in Logged-Out Mode
   
2. Add BLF for ACD Group you wish to intercept or pickup call
   
3. Use the configured BLF to intercept or pickup call of an incoming call to an ACD Group
   

BLF pour intercepter ou récupérer des appels de groupe ACD

Intercept or pickup a call via ACD to a Colleague

• Solution
  

1. Add the person to the ACD Group in logged-out mode that wish to pickup calls incoming to ACD Queue or Colleagues in ACD Group, following: Add members in Logged-Out Mode
   
2. Add BLF for intercept or pickup call of Member getting calls via ACD Group
   
3. Use the configured BLF to intercept or pickup call of a Member getting calls via ACD Group
   

BLF pour intercepter ou prendre les appels d'un collègue qui obtien un appel via un groupe ACD

ACD Group Login/Logout

• Information

With ACD you can Login/Logout using programmable key (BLF) or VTX Softphone or Use Code 80

• Solution

Watch Video how to manage Login/Logout via programmable key (BLF) or VTX Softphone

Using programmable key (BLF) on device

1. Go in kiosk to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-Phone you wish to manage the Login/Logout of ACD Group and click on Action
3. Choose as Action Type Login/out Grp, as Parameter search for the ACD Group you wish to Login/Logout, click Register, then click on Apply

connexion/déconnexion ACD groupe

ACD - monitore Collègues - Exemple Yealink

Using VTX Softphone

1. Open your VTX Softphone (DesktopControl or DesktopOperator)
2. Click on Fatures
3. In Section MISCELLANIEOUS go to Call queue
4. Check the Receive calls from the queues you wish to be Login - or uncheck if you wish to Logout (available with DesktopControl full version and free Version)

Softphone VTX - Login/Logout

Using Code 80

If you wish to use a code for Login/Logout of ACD Group (or configure on a not provisionned phone), you can use Code 80

• Login to all ACD Queues you belong to : enter: *80
• Logout from all ACD Queues you belong to : #80
• Login to a specfic ACD Queue you belong to : *80*<ACD-Queue_Number>
• Logout to a specific ACD Queue you belong to : #80*<ACD-Queue_Number>

Temporary Disable/Enable ACD Group

• Information

When using ACD Group it is possible to temporary disable the ACD Group. All incoming calls will be redirected to the defined target. The Welcome Message, if you have one, get played before calls get redirected.

Configuration de la redirection temporaire des groupes

To Disable/Enable ACD Group use Inactivate/Activate ACD group via Kiosk on ACD Group or use programmable key (BLF) or Code 83 (with more options, such as redirect to diffrent destinations)

Use Inactivate/Activate ACD Group via Kiosk on ACD Group

Steps to perform:

1. Go to My Services > Telephony > Your Virtual PBX
   
2. Click on Open editor and chose the Tab GROUPS
   
3. Search for the group you wish to Inactivate/Activate and click on Modify next the Group is ACTIV / INACTIV
   
4. Confirm with Register
   

Inactivate / Activate ACD Group

Inactive ACD Group - reactivate

Temporarily Redirect Group using a programmable key (BLF) on a phone

Videos showing how the "Redirect Group" feature is working

Load video

YouTube

YouTube might collect personal data. Privacy Policy

ContinueDismiss

To activate/deactivate temporary redirection of ACD Group set, you can setup programmable key on your device

Steps to perform:

1. Go to My Services > Telephony > Manage my IP-Phones => https://kiosk.vtx.ch/VoIP/ManageToIP.aspx
2. Choose the IP-phone you wish to setup the key and click on Action
3. Use Redirection Grp feature
   1. Select the Group that you with to temporarily redirect.
      1. Warning only recent Group are displayed, cf Helper message below
      2. You need to belong to the Group to be able to manage it (security feature), so if you wish to manage a group without ringing, add the phone in the group in "loggout mode"
   2. Now select the destination where you wish to redirect the calls to
4. Apply
5. Now you can use this key to enable/disable/check_status of the temporarily redirection

Speed Dial configuration ACD Group ON/OFF

Using Code 83

If you wish to use a code for Inactivate/Activate ACD Group, you can use Code 83

• Activate Call Forward for all ACD Groups you belong to: *83
• Deactivate Call Forward for all ACD Groups you bleong to: #83
• Activate Call Forward (all Groups belonging to) to one specific number: *83*<CF target>
• Activate Call Forward to a diffrent destionation and specific ACD Group: *83*<CF target>*<Group number>
• Activate Call Forward all for one specific ACD Group only: *83**<Group number> (remarque: you need to set 2 stars!)
• Deactivate for specific queue only: #83*<Group number>

Call Waiting - not available with ACD Group

• Information

When using ACD Group, Call Waiting is not available anymore, where as with old CQ Group it was available.
If you really, really need Call Waiting, use one of the 2 Solutions below:

• Solution 1

Redirect incoming calls to a single number and activate Call Waiting, redirect from your single number to an ACD Queue

• Solution 2

Ask Technical Support to activate an OLD CQ Group manually, to be able to manage Call Waiting via Kiosk (you will loose ACD functions, only standard CQ functions available)

Consider Group member redirection - not available with ACD Group

• Information:
  • When using ACD Group, Consider Group member redirection is not available anymore like on the old "Call Queue" system. This feature has been removed because one user could break down the whole group if redirecting to a mobile voicemail for example. So all user redirections are discarded with ACD. But we have a nice new alternative to provide similar feature, splitting up user and group redirections management
  • The main reason why people were using Consider Group member redirection was to be able to use the Call Forward No Reply 5s to "disable" the group and redirect it somewhere else from one single number in the group. Now we have a new feature that allows any allowed user in an ACD group to "disable" the group and redirect it somewhere else. This feature can be setup from the Kiosk, or from a "BLF" key or with a call prefix, cf below

• Problematic 1: You wish to be able to temporarily disable a group and redirect it somewhere else.

• Solution 1a: Use the new ACD feature ACD Temporarily disable a group and redirect it somewhere else.

• Solution 1b: If you have only one person in the group, do not use a group but a single number. In this case, you will be able to redirect calls anywhere setting up redirection on this phone directly

• Solution 1c (temporarily solution not recommended): Ask Technical Support to activate an OLD CQ Group manually ( send information about Name of CQ Group ) - you will be able to manage again Consider Group member redirection from Kiosk. This could only be a temporarily solution because old Call Queue system is deprecated and will be removed from future version of our system.

When I setup ACD Group hierarchical or others, call cut after 15s

• Information

If you setup an ACD Queue by default (not simultaneous) the default value is 15s.
Therefore the Call will be cut after 15s and will never ring on all the Members or get forward to another Group or Voicemail!
You need to adapt the default value of 15s ringing ( Note: 5s = 1x ringing )

• Solution

You need to count and take decision: Take the members in the Group and multiply them with ringing.

• Example hierarchical

1. You have 5 Members
   
2. You let ring on each member 3x ( 15s )
   
3. To have the call ringing on ALL 5 Members: Multiply 5 Members with 15s ringing = 75s ringing
   
4. Information: If one or more Members are Logged Out of the ACD Queue, Ringing will start from the beginning!
   

Where can I configure Overflow for "No Agent logged in"

• Information:

For the time beeing the Call Overflow for "No Agent logged in" is the same as configured in condition "Maximum number of callers"

Call Overlow No Agent logged in