FAQ:VoIP:ACD/fr

BLF: monitor ACD Group and Colleagues

• Information
  

With ACD, as a security measure, it in not possible to monitor a call for an ACD Queue or monitoring a collegue getting incoming calls via ACD Group, when he is not member of this group!

• Solution
  

Add the person to the ACD Group in logged-out mode that wish to monitor ACD Queue or Colleagues Setup BLF for ACD Group and Members to monitor

Add members in Logged-Out Mode

Steps to perform:

1. Go to My Services > Telephony > Your Virtual PBX
   
2. Click on Open editor and open Tab GROUPS
   
3. Search for the group you wish to monitor and click on configure
   
4. Add the additional members and save by click on Register
   
5. Now logout those members of the ACD group by clicking on the green icon (logged in) to turn into red (logged out)
   

Setup BLF to monitor ACD Group

Steps to perform:

1. Go to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-phone you wish to setup BLF and click on Action
   
3. Choose as Action type: BLF, as Parameter: search for ACD Group by type the ACD Group you wish to monitor (example 300) and click on Apply
   

BLF to monitor ACD Group - Kiosk - programmable key

Example Yealink BLF : Incoming Call via ACD ringing (Example Yealink - ACD WIKI ringing)

ACD - Monitore ACD Group - Example Yealink

Setup BLF to monitor Colleagues getting calls via ACD Group

Steps to perform:

1. Go to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-phone you wish to setup BLF and click on Action
   
3. Choose as Action type: BLF, as Parameter: search for the member by type the user you wish to monitor (example 5302) and click on Apply
   

BLF Monitor Collegue - Kiosk

Example Yealink BLF : User Snom D765 ringing

ACD - monitor Colleagues - Example Yealink

BLF: Intercept or pickup calls from ACD Group or Colleagues

• Information
  

With ACD, as a security measure, it in not possible to intercept or pickup a call for an ACD Queue or a Colleagues getting incoming calls via ACD group.

Intercept or pickup calls from ACD Group

• Solution
  

1. Add the person to the ACD Group in logged-out mode that wish to pickup calls incoming to ACD Queue or Colleagues in ACD Group, following: Add members in Logged-Out Mode
   
2. Add BLF for ACD Group you wish to intercept or pickup call
   
3. Use the configured BLF to intercept or pickup call of an incoming call to an ACD Group
   

BLF to Intercept or pickup calls from ACD Group

Intercept or pickup a call via ACD to a Collegue

• Solution
  

1. Add the person to the ACD Group in logged-out mode that wish to pickup calls incoming to ACD Queue or Colleagues in ACD Group, following: Add members in Logged-Out Mode
   
2. Add BLF for intercept or pickup call of Member getting calls via ACD Group
   
3. Use the configured BLF to intercept or pickup call of a Member getting calls via ACD Group
   

BLF to intercept or pickup calls from a Collegue, getting call via ACD Group

ACD Group Login/Logout

• Information

With ACD you can Login/Logout using programmable key (BLF) or VTX Softphone or Use Code 80

• Solution

Watch Video how to manage Login/Logout via programmable key (BLF) or VTX Softphone

Using programmable key (BLF) on device

1. Go in kiosk to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-Phone you wish to manage the Login/Logout of ACD Group and click on Action
3. Choose as Action Type Login/out Grp, as Parameter search for the ACD Group you wish to Login/Logout, click Register, then click on Apply

ACD Login/Logout Group

ACD - Login/Logout - Example Yealink

Using VTX Softphone

1. Open your VTX Softphone (DesktopControl or DesktopOperator)
2. Click on Fatures
3. In Section MISCELLANIEOUS go to Call queue
4. Check the Receive calls from the queues you wish to be Login - or uncheck if you wish to Logout (available with DesktopControl full version and free Version)

Softphone VTX - Login/Logout

Using Code 80

If you wish to use a code for Login/Logout of ACD Group (or configure on a not provisionned phone), you can use Code 80

• Login to all ACD Queues you belong to : enter: *80
• Logout from all ACD Queues you belong to : #80
• Login to a specfic ACD Queue you belong to : *80*<ACD-Queue_Number>
• Logout to a specific ACD Queue you belong to : #80*<ACD-Queue_Number>

Temporary Disable/Enable ACD Group

• Information

When using ACD Group it is possible to temporary disable the ACD Group. All incoming calls will be redirected to the defined target. The Welcome Message, if you have one, get played before calls get redirected.

Setup temporary group redirection

To Disable/Enable ACD Group use Inactivate/Activate ACD group via Kiosk on ACD Group or use programmable key (BLF) or Code 83 (with more options, such as redirect to diffrent destinations)

Use Inactivate/Activate ACD Group via Kiosk on ACD Group

Steps to perform:

1. Go to My Services > Telephony > Your Virtual PBX
   
2. Click on Open editor and chose the Tab GROUPS
   
3. Search for the group you wish to Inactivate/Activate and click on Modify next the Group is ACTIV / INACTIV
   
4. Confirm with Register
   

Inactivate / Activate ACD Group

Inactive ACD Group - reactivate

Setup programmable key (BLF) on device

To activate/deactivate temporary redirection of ACD Group set, you can setup programmable key on your device

Steps to perform:

1. Go to My Services > Telephony > Manage my IP-Phones
   
2. Choose the IP-phone you wish to setup the key and click on Action
   
3. Use Speed Dial and enter *84**<ACD Group number> (for deactivate) - Note: you need to enter 2 stars between Code and Group!
4. Use Speed Dial and enter #83*<ACD Group number> (for reactivate)
5. Apply

Speed Dial configuration ACD Group ON/OFF

Using Code 83

If you wish to use a code for Inactivate/Activate ACD Group, you can use Code 83

• Activate Call Forward for all ACD Groups you belong to: *83
• Deactivate Call Forward for all ACD Groups you bleong to: #83
• Activate Call Forward (all Groups belonging to) to one specific number: *83*<CF target>
• Activate Call Forward to a diffrent destionation and specific ACD Group: *83*<CF target>*<Group number>
• Activate Call Forward all for one specific ACD Group only: *83**<Group number> (remarque: you need to set 2 stars!)
• Deactivate for specific queue only: #83*<Group number>

Call Waiting - not available with ACD Group

• Information

When using ACD Group, Call Waiting is not available anymore, where as with old CQ Group it was available.
If you really, really need Call Waiting, use one of the 2 Solutions below:

• Solution 1

Redirect incoming calls to a single number and activate Call Waiting, redirect from your single number to an ACD Queue

• Solution 2

Ask Technical Support to activate an OLD CQ Group manually, to be able to manage Call Waiting via Kiosk (you will loose ACD functions, only standard CQ functions available)

Consider Group member redirection - not available with ACD Group

• Information

When using ACD Group, Consider Group member redirection is not available anymore, where as with old CQ Group it was available.
If you really, really need Consider Group member redirection, use one of the 2 Solutions below:

• Solution 1

Redirect incoming calls to a single number and use Redirections needed. You can alo redirect from your single number to ACD Queue

• Solution 2

Ask Technical Support to activate an OLD CQ Group manually ( send information about Name of CQ Group ) - you are able to manage Consider Group member redirection via Kiosk

When I setup ACD Group hirarchical or others, call cut after 15s

• Information

If you setup an ACD Queue by default (not simultaneous) the default value is 15s.
Therefore the Call will be cut after 15s and will never ring on all the Members or get forward to another Group or Voicemail!
You need to adapt the default value of 15s ringing ( Note: 5s = 1x ringing )

• Solution

You need to count and take decision: Take the members in the Group and multiply them with ringing.

• Example Hirachical

1. You have 5 Members
   
2. You let ring on each member 3x ( 15s )
   
3. To have the call ringing on ALL 5 Members: Multiply 5 Members with 15s ringing = 75s ringing
   
4. Information: If one or more Members are Logged Out of the ACD Queue, Ringing will start from the beginning!
   

Where can I configure Overflow for "No Agent logged in"

• Information:

For the time beeing the Call Overflow for "No Agent logged in" is the same as configured in condition "Maximum number of callers"

Call Overlow No Agent logged in