FAQ:Teams

General Questions

What are the differences between a "Teams Connect" and a "Teams Virtual" ?

	Teams Connect	Teams Virtual
Short Description	VTX handles "only" the connection between Teams Cloud and the Telephony Network allowing you to operates real phone numbers on your Teams Client	Teams Virtual allows an hybrid environment with SIP Phones and Teams Phones The Intelligence remains handled in the VTX Kiosk
Analogy	Like a VTX ConnectPBX product but to be used only with Teams Cloud ( preconfigured for Teams by VTX with a lot of automation )	a VTX VPBX service allowing you to use MS Teams client in parallel of normal SIP phones
VTX Service and Licenses Needed	a "Teams Connect" ( billed per number of concurrent calls + number of numbers ) N/A per user	a VPBX Service ( billed per number of numbers ) a "Teams Virtual" license per user
Microsoft Licenses Needed	Microsoft Teams per user Microsoft Phone System per user	Microsoft Teams per user Microsoft Phone System per user
Pros	- Simple and Basic solution from VTX to add real numbers to your Teams accounts - "Cheap" solution to use Microsoft Teams	- Allows an hybrid solution if you do not wish to have all your users and landing Zone to use Microsoft Licenses. - You can use a mix of simple SIP phones ( Gigaset, Snom, Yealink,... ), VTX Softphones (DeskopControl / MobileControl), Teams Softphones and Yealink Teams phones within the same user or on different users - Allows to handle all Time Conditions and IVR and Groups within VTX Kiosk
Cons	- Management of all intelligence in Teams Admin in less sexy than in the VTX Kiosk - Doesn't allow to operate simple SIP phones within the same VTX service

Keep my @company.ch domain : Can I use VTX Teams service with my own Teams domain @company.ch ?

• Problematic: You do own a Microsoft Teams domain like company.ch and you would like to integrate the accounts you have within a "VTX Teams Connect" or "VTX Teams Virtual"
• Information:
  • When subscribing to a VTX Teams service, VTX will provide you with a teams domain like xxxx.teams.ipvoip.ch . This domain will be used to bridge your own Teams accounts ending with "@company.ch" with the VTX service. You will never need to force this domain for your end user
  • During the VTX Teams service setup, you will be asked to create one temporarily user with the @xxxx.teams.ipvoip.ch domain, but only one, and you can delete it as soon as service is running
  • The scrips provided by VTX will allow you to assign numbers to your @company.ch Teams users
• Conclusion: Yes, you can use your own Teams domain @company.ch with VTX Teams service, no need to change your users domain

Multi-Provider : Can I use VTX Teams service in parallel of other provider services ?

• Problematic: You do already have another provider that handles the telephony Direct trunking and you wish to also integrate a VTX Teams service
• Information: VTX does provide a unique teams domain per service and also create unique Call Routing rules including this unique ID
• Conclusion: Yes, it is possible to setup a VTX Teams service in parallel of an existing service from another provider. You will select which number is handled by which provider.

Frequent Errors

New-CsOnlineVoiceRoutingPolicy - Cannot find specified Online PSTN usage

• Problem: When we run the script to create the call routing, you might get a red error that New-CsOnlineVoiceRoutingPolicy is not working
• Symptoms: When running the script to create the call routing, you might get an error "Cannot find specified Online PSTN usage"
• Possible Explanation:
  • You forgot to create the temporary User "enableteams"
  • MS Teams platform is getting some delay and between the time we create the Online PSTN usage and the time we use it in Online Voice Routing Policy, we need to wait for Teams platform to get up to date
• Solution:

1. Verify that you did create the "enableteam" user, cf FAQ:Teams#Create_a_temporarily_user_in_the_.3Cservicenumber.3E.teams.ipvoip.ch_domain
2. Wait up to 4h and try again to use the script again

As you can see after some time, the same command did work

Teams Error - Cannot Find Online PSTN Usage - Wait a few hours and try again

Powershell 7 preview : Could not load type 'System.Security.Cryptography.SHA256Cng'

• Information: Until powershell 7 gets stable, importing modules like SkypeOnlineConnector might fail with error
• Additional Information: Explanation of the problem with module AzureAD, but it is the same reason https://github.com/PowerShell/PowerShell/issues/11564
• Workaround: Use the command below to import the module with the "-UseWindowsPowerShell" parameter
• Solution : Stick to powershell version 6 until version 7 gets stable

PS C:\Windows\System32> Import-Module -UseWindowsPowerShell SkypeOnlineConnector
WARNING: Module SkypeOnlineConnector is loaded in Windows PowerShell using WinPSCompatSession remoting session; please note that all input and output of commands from this module will be deserialized objects. If you want to load this module into PowerShell please use 'Import-Module -SkipEditionCheck' syntax.

File:Teams-script-error-powershell-7-preview.png Powershell 7 preview - Could not load type 'System.Security.Cryptography.SHA256Cng'

Cannot Import Module SkypeOnlineConnector

• Information: By default, it is not allowed to execute powershell scrip on a Windows PC, you need to explicitly allow it
• Problem: If you did not follow the Microsoft documentation while installing the SkypeOnlineConnector module, you will not be able to import it
• Symptoms: You will get the powershell error below
• Solution: Open a powershell prompt as admin and set "Set-ExecutionPolicy RemoteSigned -Force" ( cf below )
• Additional Information: cf https://docs.microsoft.com/en-us/SkypeForBusiness/set-up-your-computer-for-windows-powershell/download-and-install-windows-powershell-5-1

Confirmation of the problem, here Execution Policy is Restricted, i.e disabled

Get-ExecutionPolicy
Restricted

Solution

Set-ExecutionPolicy RemoteSigned -Force

Get-ExecutionPolicy
RemoteSigned

Error that you are getting

Modules d'importation : Le fichier "C:\Program Files\Common Files\Skype for Business
Online\Modules\SkypeOnlineConnectorSkypeOnlineConnectorStartup.psm1" ne peut pas être chargé, car l'exécution de
Les scripts sont désactivés sur ce système. Pour plus d'informations, voir "about_Execution_Policies".
(https:/go.microsoft.com/fwlink/?LinkID=135170).
En ligne:1 Caractère:1
+ modules d'importation "C:\Program Files\Common Files\Skype for Business Onlin ...


+ CategoryInfo : Erreur de sécurité : ( 🙂 [Modules d'importation], PSSecurityException
+ FullyQualifiedErrorId : UnauthorizedAccess,Microsoft.PowerShell.Commands.ImportModuleCommand

Get-CsOnlinePowerShellEndpoint : The remote name could not be resolved: 'lyncdiscover.xxx'

• Problem : You get an red colored error when using the scripts
• Symptoms: When starting to use a powershell script or command, you get an error like Get-CsOnlinePowerShellEndpoint : The remote name could not be resolved: 'lyncdiscover.xxx'
• Possible Explanation: You are using an admin account where needed lyncdiscover.$DOMAIN DNS entry is not set correctly
• Solution: Please verify and dix your Admin account DNS setup
• Workaround : Add the suffix "-OverrideAdminDomain $MSTeamsDomain" to the New-CsOnlineSession command

Incoming Call Problem

404 Not found : Number hasn't been assigned

• Problem: You cannot call a Microsoft Teams number
• Status: You have assigned a number to a "Microsoft Teams Virtual" in the Kiosk Hardware Module or the number belongs to a "Teams Connect", but incoming call towards this number are not working and are rejected.
• Symptoms: When calling the number, you get a "404 Not Found" Number hasn't been assigned error
• Check to perform 1:

1. (VoIP Analyzer for VTX Partners) Using VoIP Analyser, check the status of the number and verify that call was rejected by Microsoft Proxy with a 404 error
2. (Teams Domain) Verify in https://admin.microsoft.com/AdminPortal/Home#/Domains that you did enable the <service_number>.teams.ipvoip.ch domain for MS Teams
3. (Teams + Phone System) Verify in https://admin.microsoft.com/AdminPortal/Home#/users that you did enable Teams + Phone System to your user
4. (Number) Verify in https://admin.teams.microsoft.com/users that you did assign the correct Phone number to your user

VoIP Analyser - Call sent to Teams but rejected

Manage your Voicemail Settings

• Symptoms: Your voicemail is answering your call
• Solution: Please read https://support.office.com/article/manage-your-call-settings-in-teams-456cb611-3477-496f-b31a-6ab752a7595f

Outgoing Call

Option I wish to display a number different than my direct line on outgoing call

• Problematic: On outgoing calls, you wish to display a number that is different from your direct line number
• Information: By default, you will be allowed to display any number belonging to your trunk ( visible in Kiosk ). If you try to display a number that doesn't belong to your trunk, the system will fallback to your direct line
• Solution: You will either need to connect to the Kiosk and in the outgoing call settings of your number, change the number to be displayed, or you will need to ask VTX to enable "Special Arrangement" ( cf table below and next section )

Number you wish to display (From SIP Header)	Number you wish to Bill (P-Preferred-Identity)	"Special Arrangement" setting in VTX CRM	Option D'affichage in Kiosk (PS: Any number belonging to you could be added by VTX in this list as "Virtual Number")	Number that will be displayed (out From SIP Header)	Real Caller Number (out P-Asserted-Identity)
Your direct line A	Your direct line A	%	Your direct line A	Your direct line A	Your direct line A
Your direct line A	Your direct line A	%	Another number belonging to you B and managed by VTX ( like a group number, headnumber, INA number... )	Another number belonging to you B	Another number belonging to you B
Your direct line A	Your direct line A	%	Another number belonging to you B and not managed by VTX	Another number belonging to you B	Your direct line A
An external number like a mobile	Your direct line A	No	N/A	Your direct line A	Your direct line A
An external number like a mobile	Your direct line A	Yes	N/A	An external number like a mobile	Your direct line A

Special Arrangement : I wish to keep the number of the caller being displayed when redirecting call to an external number

• Problematic: You are redirecting incoming call towards and external number and you wish to keep the number of the caller being displayed on remote destination
• Problem: Since you are trying to display a number that doesn't belong to your trunk, it is not allowed and caller id will fallback to your direct line
• Solution: Ask VTX to enable the "Special Arrangement" on your trunk, and also ask VTX to add a "+1" to push the project "#2304 - [Kiosk] ConnectPABX - Be Able to Manage Special Arrangement and Number Format from Kiosk Directly"

CPE MS Teams

Setup a Yealink Teams Edition

1. Plug the phone with MS Teams edition on a working network
2. Click on the screen asking that you wish to login from a remote PC
3. Enter https://microsoft.com/devicelogin on your PC
4. Type the code visible on the phone
5. Enter the provided credentials

MS Teams - CPE Login from PC

Other Questions

External Access - Allow to chat and call any other Microsoft Teams user

• Problematic: You would like to be able to chat and talk with other company also using Microsoft Teams ( and also Skype )
• Solution: Follow the procedure below

1. Connect to https://admin.teams.microsoft.com/company-wide-settings/external-communications
2. Set Users can communicate with other Skype for Business and Teams users = On

Microsoft Teams Admin - Allow external access

Service Health - Get notified when there is a problem with MS Teams

• Information: You can setup Teams Service Health notification in the Admin Center . It will allow you to receive emails when there is a problem with MS Teams platform, or new features
• Solution : Follow the procedure below

1. Connect to https://admin.microsoft.com/adminportal/home#/servicehealth
2. Go to Preferences / Email tab
   1. Setup an email and tick "Send me email notification about service health"
   2. In "Include these issue types" : Tick "Incidents" and "Advisories"
   3. In "Include these services" : Tick at least "Teams"

Microsoft Admin Center - Service Health - Notification